Polymer Processing Aid PPA9022
-
Payment
-
Origin
China Mainland
-
Minimum Order
15
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
Polymer Processing Aid PPA9022
PPA 9022 is free flow, 25 mesh white powder fluoropolymer based processing aid. At a very low level addition(50-800ppm), it can improve PE processing without affect the original physical property of the plastics as well as sealing, adhesion and printing, can be used for mLLDPE, LLDPE, HDPE, LDPE, EVA and other polyolefin resin.
Product Form:
White or off-white powder
Application:
Blow film, Cast film, Blow molding and all other polyolefin extrusion process.
[Physical Property ]
ITEM | UNIT | VALUE |
Bulk Density | cm3 | 0.7g |
Particle size | mesh | 25 |
Volatile | (105?1h)% | 0.15 |
Processing Guide
The dispersion of PPA in the resin determines in a large part the using effect, the recommended process is make the 2% - 3% master batch by the twin-screw extruder, and then add it into the extrusive resin according to ultimate goal. When using for the first time, there are 20-60 minutes onset time according to the equipment, the base material and the shear rate. No onset time for the equipment that use PPA9022 long-term continuously.
Product Functions
Improve film surface quality by eliminating melt fracture;
Reduce wears of a mold in the processing; eliminate the die build up;
Increase the ratio of LLDPE in LLDPE/LDPE blends for lower cost, higher quality;
Increase output and save energy.
Shelf Life
1 year, under 30?, avoid extensive humidity and light.
Packing
Net 20kg per barrel
Food Contact Safety
PPA meets the requirements of FDA 21 CFR 177.1520 USA. It can be used in food contact.
- Polymer Processing Aid PPA9028 15 Pieces / (Min. Order)
- Polymer Processing Aid PPA9024 15 Pieces / (Min. Order)
- Polymer Processing Aid PPA9023 15 Pieces / (Min. Order)
- Polymer Processing Aid PPA9028 15 Pieces / (Min. Order)
- Polymer Processing Aid PPA9024 15 Pieces / (Min. Order)
- Polymer Processing Aid PPA9023 15 Pieces / (Min. Order)
- Fluorocarbon Solvent 15 Pieces / (Min. Order)
- Tetrafluoroethane B-Sultone 15 Pieces / (Min. Order)
- Perfluoro-3,6-Dioxa-4-Methyl-7-Octyl Sulfonyl Fluoride 15 Pieces / (Min. Order)
- Difluoroethylene 15 Pieces / (Min. Order)
- Hexafluoropropane Qxide 15 Pieces / (Min. Order)
- PTFE Wax For Water-Based Coating & Ink 15 Pieces / (Min. Order)
- PTFE Wax For Coating 15 Pieces / (Min. Order)
- PTFE Micropowder For Engineering Plastics & Rubber 15 Pieces / (Min. Order)
- FKM Powder 15 Pieces / (Min. Order)
- FKM Precompound 15 Pieces / (Min. Order)
- FKM Compound 15 Pieces / (Min. Order)
- FKM Copolymer Gum 15 Pieces / (Min. Order)
- PVDFMembrane Grade-Powder 15 Pieces / (Min. Order)
- FEP Powder 15 Pieces / (Min. Order)
- FEP Resin 15 Pieces / (Min. Order)
- PTFE Aqueous Dispersion 15 Pieces / (Min. Order)