FKM Powder
-
Payment
-
Origin
China Mainland
-
Minimum Order
15
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
FKM Powder
Powder FKM is one kind of Fluoroelastomer with shape of powder, it could be used as processing agent of engineering plastic like HDPE, LLDPE and PP, in order to improve processing performance.
Characteristics of FKM Powder
Remove or reduce the surface defect (like fracture of melt),improve the smooth and
lightness of surface of finished product;
Reduce the gel of film and membrane
Reduce pressure of mold, energy consumption as well as temperature;
It will also reduce surface melting viscosity, remove the die accumulation.
It will reduce production cost and improve the production efficiency. (under same mold pressure and temperature)
Application:
Processing aid for blow membrane, cast film; sheet and pipe extrusion; wire and cable, jacket extrusion
Processing guide:
It is suggested that firstly make master batch through extruder with Powder FKM content 2%-3%, then mix with polymer for processing at certain ratio.
Properties:
Appearance | White granules |
Granule size | 600--1000µm |
The fluorine content | not less 66% |
Mooney Viscosity(at 121°C) | 40-70 |
Moisture content | =0.3% |
Tensile strength | 13.1 mPa |
Volatiles | Max 0,25% |
Operating temperature range | -20 to 250 °? |
Density | 1.75--1.78g/cm3 |
Shelf life:
6 months and should be stored in clean, dry place with temperature below 30°?.
Package:
Sealed in PE bag and packed in drum with net weight 25kgs.
- FKM Precompound 15 Pieces / (Min. Order)
- FKM Compound 15 Pieces / (Min. Order)
- FKM Copolymer Gum 15 Pieces / (Min. Order)
- Polymer Processing Aid PPA9028 15 Pieces / (Min. Order)
- Polymer Processing Aid PPA9024 15 Pieces / (Min. Order)
- Polymer Processing Aid PPA9023 15 Pieces / (Min. Order)
- Polymer Processing Aid PPA9022 15 Pieces / (Min. Order)
- Fluorocarbon Solvent 15 Pieces / (Min. Order)
- Tetrafluoroethane B-Sultone 15 Pieces / (Min. Order)
- Perfluoro-3,6-Dioxa-4-Methyl-7-Octyl Sulfonyl Fluoride 15 Pieces / (Min. Order)
- Difluoroethylene 15 Pieces / (Min. Order)
- Hexafluoropropane Qxide 15 Pieces / (Min. Order)
- PTFE Wax For Water-Based Coating & Ink 15 Pieces / (Min. Order)
- PTFE Wax For Coating 15 Pieces / (Min. Order)
- PTFE Micropowder For Engineering Plastics & Rubber 15 Pieces / (Min. Order)
- FKM Precompound 15 Pieces / (Min. Order)
- FKM Compound 15 Pieces / (Min. Order)
- FKM Copolymer Gum 15 Pieces / (Min. Order)
- PVDFMembrane Grade-Powder 15 Pieces / (Min. Order)
- FEP Powder 15 Pieces / (Min. Order)
- FEP Resin 15 Pieces / (Min. Order)
- PTFE Aqueous Dispersion 15 Pieces / (Min. Order)